HIC101000186-manufacture,factory,supplier from China

The lower oil cylinder, used for lifting cylinder action control, features throttle damping for descent speed regulation, precise flow control through a proportional valve, and minimal vibration. It includes a solenoid valve with manual operation for platform descent in the absence of power and an overflow valve for oil circuit safety. The function of the lifting oil cylinderLift cylinder is to use liquid medium to convert mechanical energy into hydraulic energy, and through operation to achieve load lift or drop.

Hand Operated Hydraulic Pump features a maximum stroke of 29.6 and a displacement per stroke of 2.16cc.

Check Valve Parts PC08-30-0-NThreaded cartridge hydraulic check valve is used as a one-way cut-off or load holding equipmentWorking pressure 240barWithstand pressure 350barWhen the internal leakage is at 240bar, the maximum is 0.01ML/minTemperature range -40℃-120℃Seals: Nitrile rubber O-ring and retaining ring (standard type)Medium: Mineral oil with a viscosity between 7.4-420cSt (50-2000ssu) or synthetic oil with lubricating propertiesDetailed parametersWorking pressure Liquid control ratioCheck valve spring pre-pressure Use a sealed piston: Temperature range SealsMedium240bar 3:11.72bar, sta

Two solenoid hydraulic valvesDetailed parametersRated pressureMaximum decompression pressureProportional valve 2 Rated voltageMaximum coil currentCoil resistance at 20℃Optimized PWM frequencySolenoid valve 3 rated voltageAllowable ambient operating temperatureOil temperature range50 bar30 barDC 24V500mA31Ω±5 %600HZ, connector DT04-2PDC24V±10%, connector DT04-2P -20-80℃The working principle of the two-in-one solenoid valve mainly involves the interaction of the electromagnet, the valve body and the valve core, and controls the mechanical movement by controlling the current on and off of the ele

The double solenoid valve belongs to a kind of solenoid valve, and its structure is composed of an electromagnetic spring ring, a valve body, a piston, a spring, a valve seat, a gasket and other parts.Its main feature is that it has two outlets and one inlet, each outlet has a piston, and the entire device is equivalent to two check valves.structureThe double solenoid valve is composed of two parts: an electromagnet and a valve body.The electromagnet is composed of three parts: a coil, a contact, and an iron core.

Solenoid Valve PartsUsed as cut-off or load-holding oil equipment in low-flow oil circuitsWorking pressure: 207barWithstand pressure: 255barTemperature range: -40°C-120°C standard nitrile rubber sealProduct applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Solenoid Valve Parts SV08-20HJ-O-N-OUsed as cut-off or load-holding oil equipment in low-flow oil circuitsWorking pressure 207barWithstand pressure 255barThe maximum internal leakage is 0.15ml/min at 207barTemperature range -40°C-120°C, standard nitrile rubber sealThe rated load of the coil can operate continuously in the rated voltage range of 85% to 115% Product applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Parts RVPS-10Detailed parametersProduct applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Coil Parts C19-014DC-E26Features: Wide range of voltage; power supply Steel structure shell, strong resistance to mechanical damage; durableStrong high temperature resistance；Rated voltage (V) 14VDCElectrical connector type DT04-2PThe inner diameter of the coil is 14mmProduct applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Coil Parts C19-014DC-E8Features: Wide range of voltage; power supply Steel structure shell, strong resistance to mechanical damage; durableStrong high temperature resistance；Rated voltage (V) 14VDCElectrical connector type: double wireThe inner diameter of the coil is 14mmProduct applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Relief Valve parts RVC08-Y 21P24 Spring pressure setting range 15-60barMaximum working pressure 350barMaximum flow rate 30L/minTemperature range: -30°C-100°CProduct applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Solenoid Valve Parts SP2A-B3H3S-AProduct applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Solenoid Valve Parts SD2E-A4/H2R21Product applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Can be customized according to customer needs Customized case：1.Maximum working pressure: 50 bar； 2.Maximum decompression pressure: 30 bar； 3.Rated flow rate: 10L/min； 4.Rated voltage: 12V, connector DT04-2P, protection level IP67； 5.Maximum current: 1500mA, resistance: 4.72 Ω±5%; 6.Filter: 140 µm (P-Port)； 7.Protection level: IP6k6/IPX9K.

Please leave a message or send an email for details to ensure that you are satisfied with the price1.

Customized hydraulic valve block HIC101000332Detailed parametersThe maximum pressure of the P port Maximum flow Voltage rangeAllowable ambient operating temperatureThe oil temperature range 240bar30L/minDC24V±15%; plug DTO4-2P, rated power 23.8W, protection level IP67-20-80℃20-90℃Product applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Customized hydraulic valve setDetailed parametersRated pressureSystem oilRated voltageOil port specificationsIntegrated block materialAccumulator Volume:FilterPressure setting40 BarHydraulic oil: Mineral hydraulic oil of ISO VG32, 46 and 68Viscosity range: 10-500 mm2/sCleanliness level: 21/18/15 According to ISO4406 (1999)Oil temperature range: -20~80℃27V±15%, connector DT04-2P P T PORT: G3/4-ED (DIN3852-2); A PORT: G3/8-ED (DIN3852-2);P1,P2, C1-C6, M,M1: G1/4-ED (DIN3852-2); M,M1 is blocked with steel.AL-6061-T6, surface anodized1L; inflation pressure: 15 baraccuracy 10um; flow rate: 160L/min

counterbalance valve1. Keep the pressure stableIn a hydraulic system, a hydraulic balance valve can stabilize the hydraulic pressure.Generally speaking, in a hydraulic system, hydraulic actuators with different displacement will cause differences in pressure in the system.If it is not adjusted, some components will be damaged by excessive or small pressure.The hydraulic balance valve can adjust the pressure difference to keep the overall pressure in the hydraulic system stable and prevent the components from being subjected to inappropriate pressure.2.

Hydraulic pilot oil source valveDetailed parametersRated working pressureRated flow210 bar20LPMProduct applicationProduct LineOur WarehousePacking and TransportationPlease leave a message or send an email for details to ensure that you are satisfied with the price

Lower lifting hydraulic valveDetailed parametersRated pressureRated flowVoltagematerialopening pressure240bar20L/minDC24V±10%; plug type DTO4-2PValve body material aluminum alloy, surface anodized0.5 barThe hydraulic valve is a key component in the hydraulic system.

Multi-way valveApplication Scenarios:Our customized hydraulic valve blocks represent the top level of hydraulic control technology, designed with a focus on performance, reliability and durability. Their wide range of application scenarios make them ideal for use in a variety of mechanical equipment and industrial systems.Product Line:The production line for Customised Hydraulic Valve Blocks is characterised by precise craftsmanship and efficient processes, ensuring that each block is perfectly tailored to the customer's individual requirements.

PrincipleElectromagnetic reversing valve is a device that uses the principle of electromagnetic mechanics to control the state of the oil port.

hydraulic solenoid valveDetailed parametersMaximum working pressureMaximum decompression pressureRated flow rateProportional valveMaximum currentProtection levelAllowable pollutionSwitch valveAllowable ambient operating temperatureThe oil temperature range50 bar30 bar10L/minRated voltage: 24V, connector DT04-2P750mA, resistance: 20.8 Ω±5%IP6k6/IPX9K ISO 4406 class 20/18/15Voltage range DC27V±15%, plug DTO4-2P, protection level IP67;-20-80℃-20-90℃It is mainly composed of valve body, valve, electromagnet, etc.Among them, the valve is the most critical part of the quadruple solenoid valve.

Solenoid reversing valvedirectional valve1. Control the pressure of the hydraulic systemThe hydraulic control valve can change the pressure and stability of the hydraulic system by adjusting the opening size and opening method in the valve core, so as to meet the work needs of different pressure requirements. 2.